He was once a member of the flat-headed family. After undergoing 3D plastic surgery on the back of his head, he truly transformed his look.

[Special Editorial] A few days ago, a netizen posted an article in "Taiwan Kicks", saying that the back of his head is very flat. "Every time I wear headphones, I must tie my hair, otherwise the headphones will always fall down like a car stuck on a cliff in the movie." ”, “Go to the hair salon and ask a stylist to shave your head, and your friends will tell you that you have the back of your head!” However, many people with flat heads in Taiwan are often ridiculed for their crooked and flat heads. They usually need to spend a lot of time styling to cover up, but they still cannot get rid of the troubles of flat heads. For example, their hair falls easily and they feel like they just woke up every day! But don’t worry, the flatheads are now saved!

Modern medical technology makes up for congenital deficiencies, and flat heads can also be reshaped!

Many people with flat heads have been troubled by flat heads for a long time, and they hope to have beautiful round heads to perfect their look and make themselves more confident! The 3D printing technology that is popular around the world can not only be used in building bridges and houses. Now professional plastic surgeons in Taiwan are also applying 3D printing technology to craniofacial plastic surgery. They use 3D printing technology and image navigation systems to create customized implants. Once inserted, it will fit you just like haute couture. It can be printed with 3D forehead, 3D chin, 3D apple muscles, 3D orbital bones and 3D back of the head. This can improve problems such as sunken forehead, retracted chin, and sunken midface, giving people a real makeover!The medical team of Dr. Adrian M. Hsieh and Dr. Scott H. Jiang has been researching the technology of 3D printing in craniofacial surgery for many years. They are experienced and skilled in the technology. Through precise computer measurement and actuarial calculation, combined with the doctors’ rich clinical experience, the accuracy and safety of the surgery have been greatly improved, and it has attracted global attention.

3D plastic surgery on the back of the head. The recovery period from the wound is about 5 to 7 days.

3D back of the head uses 3D computed tomography (CT SCAN) and 3D printing technology to help doctors more accurately shape the curvature of the back of the head according to the shape of the patient's skull and meet the patient's needs, solving the patient's problem of a flat back of the head.Dr. Adrian M. Hsieh pointed out that the plastic surgery wound on the back of the head is smaller than the plastic surgery wound on the forehead. The location of the incision does not affect the sleeping posture. There is no need to be particularly restricted in sleeping posture after returning home. You can lie down and sleep. The patient can wash his hair immediately after the operation. There will be no foreign body sensation or discomfort, and it will not affect normal life., the recovery period is about 5 to 7 days, and you can go to work normally. In addition, the 3D back of the head plastic surgery material uses bone cement. The chemical name is polymethylmethacrylate PMMA, also known as acrylic bone cement. It was originally used in bone and neurosurgery. It is a safe and highly stable prosthetic material. It is as hard as bone to withstand external forces, making it very safe.

Ferrari sister also has a flat head and uses 3D plastic surgery on the back of her head to change her look

Artist Zhang Tingting (Sister Ferrari) once had a flat head. Because she needed to do different styles in the entertainment industry, her flat head limited her hairline design, so she decided to seek help from Dr. Adrian M. Hsieh.3DPlastic surgery on the back of the headAfter the operation, she said, "I used to be most afraid of the ponytail style because my head would look super flat, otherwise the hairstylist would have to blow dry it for a long time or use a lot of hairspray to support it. But now I have got rid of the curse of flat hair and can easily control ponytails and any style." 
  
Another David has suffered from a flat head since he was a child. He envied the round and full back of the head, and hoped to have more variety in hair design. After collecting information for a long time, he found that there are very few plastic surgeons in Taiwan who perform back of the head plastic surgery. He was also very worried about the postoperative risks and dissatisfaction. Finally, he found Dr. Adrian M. Hsieh, who has rich and complete clinical experience and is an expert in craniofacial plastic surgery. The postoperative results were very satisfactory. 
  
Mark (pseudonym) from Malaysia is very demanding about his appearance and works hard on fitness and maintenance. However, the flatness of the back of his head makes him very troubled in his pursuit of perfection. He came to Taiwan from Malaysia to seek help from Dr. Hsieh. He used 3D printing technology before surgery to develop a complete surgical plan and a head shape that fully fits the patient's head shape.3DPlastic surgery on the back of the head, the operation time is short, and the postoperative recovery process is fast and good. The most important thing is to have a satisfactory and round head shape. 
  
So far, many beauty lovers have passed3D back of head plastic surgeryTo successfully transform the head from a flat head back to a three-dimensional round head, although the pre-operative preparation time required at least one week, Dr. Adrian M. Hsieh said with a smile: "It is definitely worth it! 3D printing has created a new medical standard, which not only allows better craniofacial cosmetic results, shorter operation time, but also makes patients safer!"

A leader in 3D printing technology applications. Professional attention and recognition at home and abroad.

In 2015, the international seminar "Contemporary Applications of Facial Skeletal Surgery" organized by Dr. Adrian M. Hsieh brought together professional doctors from the United States, Singapore, Thailand, mainland China and other countries to come to exchange and learn. Unlock Taiwan’s global leadership in the application of 3D navigation printing technology. 
  
Even South Korea, known as the plastic surgery kingdom in Asia, has the best craniofacial plastic surgery in Asia. It has invited Dr. Hsieh many times since 2013 to share the application and clinical cases of 3D printing technology. In October this year, he was invited again by the Korean Association of Oral Surgery to be a speaker at APAMAS (Asian Pacific Association of Maxillofacial Aesthetic Surgeons). Among them, 3D back of the head plastic surgery has been highly discussed by doctors from all over the world, and Korean doctors have received the most attention and questions. 
  
This year, Dr. Adrian M. Hsieh was also invited by the Association of Aesthetic Medicine of the Republic of China to participate in the Spring Aesthetic Medicine Academic Symposium, the Taiwan Craniofacial Society Academic Symposium, the High-Density Polyethylene Facial Implant Symposium, the AOCMF Seminar, and the Third Brazilian International Symposium of Orthodontic and Orthognathic Surgery at São Paulo in São Paulo. 
  
It can be seen that Dr. Adrian M. Hsieh is not only a leader in the application of 3D printing technology, but also one of the doctors who has applied 3D printing technology to the widest range of applications in Asia. He has the richest clinical experience and the widest range of surgical applications. Dr. Hsieh also reminds people who want to improve the problem of flat heads that 3D printing implant surgery requires detailed communication with the doctor before surgery, a complete surgical plan, relying on the doctor’s aesthetics and technology, and rich clinical experience, etc., are all factors that patients need to consider, so as to achieve the ideal surgical effect! 
  
More3DPlastic surgery on the back of the headFor information, please visit the Fung Wah United Clinic website: 
https://goo.gl/Lo67QW

Dr. Adrian M. Hsieh (right) is not only a leader in the application of 3D printing technology, but also one of the doctors who has applied 3D printing technology to the widest range of applications in Asia. He has the richest clinical experience and the widest range of surgical applications.